Making Music Sound Real

PHASS    

 

RE 2

RE 2 - 2 channel amplifier ( Balance / RCA input )


The RE 2 amplifier, which has easily surpassed sound quality of home audio amplifiers, is now equipped with a balanced line input stage, resulting in further improved sound quality.

When the signal form the source unit is transmitted to the RE 2, it is converted to a balanced signal by a BLD (Balanced line driver) at the input of the RE 2. This pure signal is then transmitted by the constant current driving of RE 2 to the connected speakers.

The balanced line input stage of RE 2 takes music reproduction to a higher place.



Max output power:40Wx2 (RMS, 1KHz,10ohm) / Input sensitivity(10 K ohm): RCA -10dBV(0.3V), Balance -18dBV(0.13V) / Max input level: RCA +8dBV(8V), Balance +10dBV(3.2V) / Load impedance: 4-16ohm / Consumption current: Idling time (no signal) 3A, Remote off time: 2mA / Size(mm): 320(W)x92(H)x504(D) 

Max output power:40W x 2 (1 KHz / 10 ohm, RMS)

Input sensitivity(Input impedance 10 K ohm):

RCA  / -10 dBV (0.3 V)

Balance / -18 dBV (0.13 V)


Max input level:

RCA  / +18 dBV (8 V)

Balance / +10 dBV (3.2 V)

RE 2 Balance input  by BLD ( Balance Line Driver )

The true ability can authentically drive speakers  - real Masterwork of amplifier - the RE                                         

RE 2.2

RE 2.2  / 2ch amplifier ( RCA input )


RE 2.2 is one of our top grade model in the RE amplifiers. It has been constructed by our originally developed transformers and audio grade electric parts without any compromises.  It achieves a great ability that can fully control speakers and it realizes a exceptional reproduction of nature sound music. 


Two types amplifier circuits are available in RE series,


*RE 2, RE 2.2, RE 50, RE 50 HI and RE 100M - “Standard Push pull” amplifier


*RE 2.65 and RE 4.25 - “Single End Push Pull” amplifier

RE 2.65

RE 2.65 - 2 channel amplifier ( Balance / RCA input )


We set out to create a SEPP amplifier that would be a part of our RE Series and offer such excellent sound quality that it would not bring dishonor to the Phass RE name and reputation. We accomplished our objective and proudly offer the RE 2.65 as the secondary SEPP based RE Series amplifier. NON-NFB circuit produces appropriate output power suitable for delivering electric current to speakers with quite low noise, allowing the amplifier to easily control speakers and produce vivid sound. Our sound design concept places RE 2.65 on the extremity of SEPP amplifiers.

 

Max output power:65Wx2 (RMS, 1KHz, 8ohm) / Input sensitivity(10 K ohm): RCA 1.6V / Consumption current: Idle time (no

signal) 1A, Remote off time: 2mA / Size(mm): 250(W)x56(H)x326(D)


RE 4.25

RE 4.25 - 4 channel amplifier (RCA input)


RE 4.25 is a Single End Push Pull amplifier. Its NON-NFB circuit produces appropriate output power suitable for delivering electric current into speakers with quite low noise, allowing the amplifier to easily control speakers and produce vivid sound. Our sound design concept can places RE 4.25 on the highest class of SEPP amplifiers as well.

 

Have you ever listened to 
                        the abyss of music sound ?

POWER AMPLIFIER

The configuration of RE 2.65 and BLD balance line drivers

RE 4.25

RE 50HI

RE 50HI  / 2ch amplifier ( Speaker signal input )


RE 50HI is a power amplifier which has a high input (speaker signal input) stage without a RCA signal input stage. It can transmit the music signal which was outputted from another power amplifier to the connected speakers simply as the constant current driving amplifier. The speaker signal means that it is the balance transmission signal, and its signal can be transmitted to RE 50HI without getting any disturbances and noises. Accordingly RE 50HI which can be inputted such clean balance signal can perform great and coherent sound impressively. 


Output power: 2x50W  / Input sensitivity : 5V  / Load impedance : 4-16 ohm /  Consumption current : Idling time (no signal) - 3A, Remote off time : 2mA  / Size (mm) :280(W)x74(H)x320(D)  

Balance input type

RCA input type

RE 50

Basic configuration of RE 50HI

RE 2.2 specification


Output power: 2x40W  / Input sensitivity : 0.25V  / Input impedance : 10 K ohm / Load impedance : 4-16 ohm /  Consumption current : Idling time (no signal) - 3A, Remote off time : 2mA  / Size (mm) :320(W)x92(H)x504(D)  

RE 4.25 specification


Max output power:25Wx4 (RMS, 1KHz, 8ohm), 100Wx2 (RMS, Bridge Connection) / Music Power: 50Wx4  / Input sensitivity(10K ohm): RCA 1.6V / Consumption current:Idle time (no signal) 1A, Remote off time: 2mA / Size(mm): 250(W)x56(H)x326(D)

 

RE 100M

RE 100M specification


Max output power : 1x100W (1 KHz / 10 ohm, RMS) / Input sensitivity : 0.25V / Load impedance : 4-16 ohm /  Consumption current : Idling time (ON, no signal) - 3A, Remote off time : 2mA  / Size (mm) :280(W)x74(H)x320(D)

RE 100M / monaural power amplifier (RCA input)


RE 100M is the highest grade small sized transistor monaural power amplifier succeeded in a circuit layout of Vacuum Tube amplifier.  It has the same concept of the constant current driving can realize the highest drivability. Its pure organic sound reproduced by RE 100M will be able to convey the heart of musicians as if the music is being performed in front of one’s eyes. RE 100M can output real strong power (1x100W at 1 KHz/10 ohm, RMS) will be able to perform great musical sound.