PHASS Neo series

“PHASS Neo” was set up in order that we arrange not only car audio products with entry level prices but also high quality products which can get musical quality sounds.

PI-165A 2 way speaker system

This 2 way system consists of a 165 mm mid bass and 20 mm tweeter. The mid bass (P165IA) has a thin aluminum cone and a ferrite magnet. The Neodym magnet tweeter (P20IT) uses the diaphragm combined with wool and silk. PI-165A features rhythmical and swinging sounds, and PI-165A is suitable for car audio beginners.

Music power : 40W / Frequency response : 60-20,000Hz / Mid bass impedance : 2.45 ohm / Mid bass (P165IA) Outer dimension, Fixing P.C.D : 145mm / Installing depth : 63mm / Tweeter (P20IT) / Tweeter impedance : 4 ohm / Diameter : 39.5mm / Mounting hole : 36mm / installing depth : 14mm /Crossover :

PI-165A

PI-165G 2 way speaker system

This 2 way system consists of a 165 mm mid bass and 25 mm tweeter. The mid bass (P165IG)  a glass fibre based cone and a ferrite magnet. The Neodym magnet tweeter (P25IT) uses the diaphragm combined with wool and silk as well.   P165IG performs dynamic and substantial music sounds and P25IT shows good high frequency range quality.

Generally PI-165G is the cost effective system speaker we can recommend widely.

Music power : 45W / Frequency response : 60-20,000Hz / Mid bass impedance : 2.45 ohm / Mid bass (P165IG) Outer dimension, Fixing P.C.D : 145mm / Installing depth : 63mm / Tweeter (P25IT) / Tweeter impedance : 4 ohm / Diameter : 47mm / Mounting hole : 44mm / installing depth : 13mm /Crossover :

PI-165G

PE-170P3

PE-170P3 3 way speaker system

This 3 way system consists of a 170 mm mid woofer and 88mm mid range and 25 mm tweeter. 

The mid woofer (P170EP) a paper fibre based cone and a ferrite magnet (be specialized in low-pitched sounds) . 

The mid range  (P88EP) a paper fibre based cone and a Neodym magnet (have a wide frequency band)

The tweeter (P25ES) Neodym magnet uses the diaphragm combined with translucence silk as well.   


PE-170P3 with a system that can be implemented without sub-woofer, you can experience high levels of information, 

stage formation, and three-dimensional sound.

Generally PE-170P3 is the cost effective system speaker we can recommend widely.


Music power : 120W / Frequency response : 49-24,500Hz /Tweeter (P25ES) / impedance : 3.6 ohm / Diameter : 47mm / Mounting hole : 48mm / installing depth : 14mm,  Mid range(P88EP) / impedance : 2.5 ohm / Outer dimension, Fixing P.C.D : 77mm / Installing depth : 36mm Mid bass (P170EP) / impedance : 2.5 ohm / Outer dimension, Fixing P.C.D : 148mm / Installing depth : 67mm